A Birthday Carp
Today for my birthday I took some time to visit a local mud flat to chase Carp. Managed to hook into a feisty one in 2 feet of water who despite being small still managed to take me into my backing. Only one I landed but it was a lot of fun, first Carp of the year, and a nice way to enjoy my birthday.
Sarge's Crappie Fly

Sarge's Crappie Fly is a local favorite and an original pattern developed by a member of my local Fly Fishing Federation Club. Simply a killer pattern it is my go to pattern when targeting Crappie. I have received some requests for what flies I use when chasing Crappie so I thought I would share this one with you all first. Hope it helps you bring to hand as many Crappie as it has for me.
Ingredients:
Size 8 Streamer Hook
Chartreuse Marabou
Chartreuse Thread 6/0
Small Dumbell Eyes
Gold Wire
6 Strands Peacock Herl
Grizzly Hackle
Step 1:
Tie in dumbell eyes close to eye of hook.
Step 2:
Tie in marabout tail, tail should equal length of hook.
Step 3:
Tie in peacock herl, gold wire, and grizzly hackle near bend of hook.
Step 4:
To create the body of the fly, palmer peacock herl forward towards eyes, secure and cut.
Step 5:
Palmer forward the Grizzly Hackle opposite the direction of the peacock herl, secure and cut.
Step 6:
Advance Gold Wire through the Hackle, this gives strength and longevity to the fly, secure and cut behind the eyes. Whip finish and apply head cement.
A Little Crappie Fishing
Snuck in some Crappie fishing before the latest cold front and caught quite a few. No real big slabs but fun nonetheless, also no single pattern stood out but all were caught either using Sarges Crappie Fly, Crappie Candy, or Clousers. Retrieve was very slow. Overall a beautiful and relaxing night.
Greys Streamflex XF2 Review
Spyderco Pacific Salt: Knife Review

The Good: Foremost, the knife is rustproof. In 8 months of using it in and around water, I have not had a single problem, nor from what I have seen from other's tests has anyone had problems with rust. Fresh or saltwater, this knife holds up. This is a knife that is a great tool if you spend a lot of time around the water like me. If you forget to wipe it off or it spends time sitting in water at the bottom of your boat, its just not a problem. The H1 Steel is really phenomenal stuff. Secondly, the handle really has a lot of grip to it, especially when wet and even in gloves, I was really impressed with this. Third, and this may seem an odd point, but I am really glad Spyderco went with a bold yellow color for the handle. Many times when fishing I would set down the blade for a moment, forget about it momentarily, but then see it out of the corner of my eye again very quickly. The yellow color saved me from losing it. Opening and closing is simple and easily preformed with one hand. The blade was easy to sharpen and held its edge moderately well, but does dull faster than other higher end steels.
The Bad: I honestly had a hard time coming up with much in this category at all. Yet, with an MSRP of $124.99 the blade is a bit price prohibitive for some budgets (if you shop around, you should be able to find it for around $70). Also the blade shape, while great for most jobs around the water doesn't make the greatest filet knife, not that its designed to but for those looking for a "fishing" knife that can do it all, you can filet with this but its not going to be the prettiest job, as I can attest. A sheepfoot style blade is just not the tool for that job. Other than that, I cannot think of a job in or around the water that this knife wouldn't be appropriate for.
Verdict: 9/10 I am very happy with this knife. It functions as my primary knife any time I am around water. While it won't dazzle your friends with glitz, this knife functions perfectly as it is intended, a hard working, robust tool; well designed and functional.
Tenkara: A Second Take
First of all, a big thank you to Michael over at Troutrageous for his Tenkara advice and for sending me a few of his hand tied Kebari, pictured below. If you haven't been to Michael's page be sure to check it out. Lots of great information, humor, and links over there.
So yes, Tenkara fishing round two. This time around was much more successful. Landed four Crappie and lost three. Enjoyed it a lot more this outing but it still feels a bit ... alien. All new things take time I am sure. My biggest obstacle was learning how to fight the fish and bring them in, hence I lost those three. I felt with the long rod I wasn't able to get the hooksets I otherwise was used to and felt clumsy bringing them in. Beyond that I had a good time. The fish were a tad bigger this time, and thus more fun on the other end. Still getting use to the "retrieve" and the feel of the rod. Look forward to trying it on some Bluegill perhaps next time, but more than anything, I feel the real verdict will come when I can try it on moving water. All in all it was a successful and fun trip.
Cold Front Crappie
Less than a week ago it was mid-80's and sunny. The past three days have been in the 40's with intermittent rain scattered throughout. All else equal this means a more reluctant fish that are harder to find. However, don't be to discouraged. Crappie can still be brought to hand, it just takes a little more work. Now I am not a Crappie expert, but I can hold my own, have read a fair amount on the subject, and talked with several much more experienced than myself. As a result I have come up with four conclusions on how to increase your success with cold front Crappie:
- Decrease the size of your presentation. I typically drop down one or two lure/fly sizes on my presentation.
- SLOW down your presentation. The fish are going to be more lethargic and more reluctant. Slowing down keeps it in front of them longer and increases your hook up percentage. I typically go at half my normal speed.
- Try deeper water. Deeper water is more resistant to temperature changes in the short-run and often those fish that were shallower during the warmer weather will be found in deeper water adjacent to where you were catching them earlier.
- Stick close to cover. Present your lure/fly tightly next to cover, whether that be submerged timber, a rock pile, or vegetation. You may snag more often but its the price to pay.
I employed those four tactics yesterday and had a very successful day despite the odds being stacked against me. I had to work for the fish but in some ways that made it all the more rewarding. No monsters but I still had fun.
Clinton Lake Crappie
It is hard to beat large Crappie on a fly rod. The action is continuous and some of these slabs can put up quite the fight. For me Crappie season signals the official start of spring and warm water fishing. So the other day I went to my local home water, Clinton Lake and threw a fly for a few hours, landing dozens of Crappie. I only stopped when I eventually was crowded out by others (I prefer solitude while fishing, and thus tend to vacate an area when too many people arrive). Still it was a lot of fun and I hope to get back down there later this week for round two. All were caught on a Sarge's Crappie Fly, casting parallel to the banks. Here are a few of the willing participants:
Happy Easter
Spent some time with my Dad fishing a new pond this Easter. More or less we were just trying out his new rod, an 8 weight TFO TiCr X, that my family gave him for his birthday. The rod was way more than required for these fish, but it is always fun to cast a new stick.
Tenkara: A First Taste
I had been debating trying Tenkara for several years now, so I finally took the plunge. Following Michael's advice over at the blog Troutrageous (be sure to check out his blog if you haven't already), I decided on a 12 ft Iwana.
As with all things new, the first attempt is a mix of frustration, excitement, and an ever present learning curve. All three described yesterday. First impression: the system of knots I found to be innovative, the casting fairly intuitive (had to be careful not to overpower it though), but what struck me as must peculiar and difficult to get use to was the lack of any line near my hand to manipulate the fly with. In moving water I think I would have been more okay with this but fishing for warmwater species it was difficult to manipulate a 12 rod while trying to think what the tiny fly on the other end was doing. On top of this the rod was a tad heavier than expected.
Now don't get me wrong, I enjoyed myself greatly. I see great potential in small streams in rivers while trout fishing, but in a stillwater situation like a lake or pond I just wasn't completely sold on the idea yet. I like to manipulate the fly more and have a more direct connection. That said I am going to give it a couple more shots and hopefully catch some bigger bluegill and some crappie. I only had one willing participant this outing and lets just say he barely put a bend in the rod. I am still excited to try this new style of fishing (new to me) but still unsure what the utility will be for Bluegill and Crappie in ponds, which was my hope. Needless to say, the jury is still out but I will keep you up to date on future outings regarding how my opinion has changed or not.
Subscribe to:
Posts (Atom)
Popular Posts
Labels
- 14'er
- Arizona
- Arkansas
- Baitcaster Reels
- Bass
- Book Review
- Camping Gear
- Carp
- Catfish
- Colorado
- Conventional Fishing
- Copperhead
- Crappie
- Driftless
- Ethics
- Featured
- Fishing Films
- Flats
- Florida
- Fly Fishing
- Fly Reels
- Fly Rods
- Fly Tying
- Guns
- Herping
- Hiking
- Hunting
- Ice Fishing
- Informative
- Iowa
- Kansas
- Kayak
- Knives
- Minnesota
- Missouri
- Muskie
- Northern Pike
- Oklahoma
- Product Review
- Recipes
- Reels
- Rig Series
- Rock Climbing
- Rod Review
- Saltwater
- Spinning Reels
- Sunfish
- Tenkara
- Trout
- Video Short
- Walleye
- Wiper
Blog Roll
-
Taylor-Made9 hours ago
-
-
-
Gold, Greed and Grandpas1 week ago
-
August 20251 week ago
-
-
-
Wet Wading the Clarion River3 weeks ago
-
Higher Elevations5 weeks ago
-
My latest book available on Amazon2 months ago
-
Opening Daze: 20254 months ago
-
Jon Hart CarpFest4 months ago
-
Big Smallmouth9 months ago
-
-
-
-
Come With Me To Montana?2 years ago
-
Wyoming Antelope2 years ago
-
Hello world!3 years ago
-
Brook trout camp 20205 years ago
-
Gear Review: REI Quarter Dome SL25 years ago
-
Fly Fishing Arkansas and beyond...5 years ago
-
Caddis Larva5 years ago
-
Wisconsin Driftless Trout Opener 20205 years ago
-
-
A Late June Rewind6 years ago
-
The Elephant6 years ago
-
2019 Will Be Glorious6 years ago
-
I used to be...6 years ago
-
-
-
-
-
Soggy Camping Trip8 years ago
-
-
Responding to Spring8 years ago
-
Kayak Drag Race8 years ago
-
The golden rule8 years ago
-
Announcement8 years ago
-
-
-
View from the bench...8 years ago
-
A Tale of Three Steelhead9 years ago
-
Spring fishing9 years ago
-
Currents: Alaska9 years ago
-
"We prefer to make our own..."9 years ago
-
My Son9 years ago
-
The Ol Worm and Bobber10 years ago
-
PRODUCT REVIEW: Hydration On The Go!10 years ago
-
Iron Fly Chicago (burbs)10 years ago
-
Shad Appeal10 years ago
-
-
-
-
Brrrrr10 years ago
-
Introduction to Waterfowl Hunting10 years ago
-
-
-
-
what is in the bait bucket11 years ago
-
Key West Flats Slam11 years ago
-
The Secret Spot11 years ago
-
-
-
-
-
-
Followers
Outdoor Links
- Bonefish and Tarpon Trust
- Catch Magazine
- Dally's Fly Shop
- Deneki Outdoors
- Driftless Fishing Report
- Field and Stream
- Free State Fly Fishers
- Hardy
- In-Fisherman
- International Game Fish Association
- Jazz and Fly Fishing
- Kansas Fishing Report
- Midcurrent
- Savage Arms
- St. Croix Rods
- Tackle Tour
- Tackle Warehouse
- The Drake
- Thorne Bros
- Waterworks Lamson
- Yager's Fly Shop